We recommend following these steps for a smooth (and stress-free) setup:

1. Assemble pole: Attach the pieces of your flag pole, and then add the antenna to the top of the pole.
2. Add flag: Feed the antenna through the pocket that runs along the side of your flag (the hole is quite small, but it’s there).
3. Attach base: Place the prong on the top of your base into the hole at the bottom of the flag pole.
4. Secure Flag: Make sure the bungee is attached to both the flag and the hook on the flag pole.

Yes, you can choose between single or double-sided flag printing on our standard material. Single-sided flags are more translucent, which lets the flag design (and sunlight) shine through, while our more opaque, double-sided personalised flags offer richer colour saturation. Unfortunately, we do not offer double-sided printing on our recycled polyester flags.

The flagpole is black and, depending on the size ordered, will be either 1.7 cm or 2.5 cm in diameter. We offer fibreglass and aluminium poles with a bungee to connect them. It also has a plastic hook that is used to secure the flag to the pole – and you can adjust the hook to increase or decrease the flag’s tension.

In many respects, choosing one custom flag shape over another can be a matter of personal preference — that said, there are benefits to each option. Feather flags are a popular choice because of their unique and eye-catching shape. Sail flags offer the largest printable area. And since the fabric on our teardrop flags are drawn taut, they tend to be the most stationary of our 3 options.

Our flag printing process uses dye sublimation on translucent polyester. The resulting banners are slightly sheer, which allows the design to show through on both sides. If you choose double-sided printing, your flag will include 2 layers of printed material and a third opaque layer in between for a richer, more saturated look.

Yes, the material is DIN 4102 certified and classified as B1 fire retardant.

Yes, but please be aware that they will no longer be considered fire retardant, and they will lose B1 classification. If you still choose to wash your flag, we recommend washing with cold water, and then letting it air dry.

About 123 x 30 x 10 cm (length x width x depth). They weigh about 4 kg – if you add our square, steel base to your order, it will weigh significantly more – see below.

Here are the weights for our flag base options:

• Cross Bar Base: 1.2 kg
• Ground Spike: 1.3 kg
• Drive-on Foot Base: 1.8 kg
• Square Steel Base: 12.5 kg
• WaterTank Base: 2.3 kg (empty)

Dimensions vary depending on the size and shape of the flag selected. The amount of tension applied also affects the final dimensions. Please see the tables below, which are accurate to within 10 cm:

Flag: Feather

Flag: Sail

Flag: Teardrop

This depends on the shape, size and sides of the flag. The table below details how many antenna pieces come with each varying flag shape, size and number of sides.

Flag Shape: Feather

Flag Shape: Sail

Flag Shape: Teardrop