To assemble your corrugated plastic totem, follow the steps below:

Step 1: Remove the backing from one adhesive strip.

Step 2: Press the adhesive strip along the edge of the internal wall of the cardboard.

Step 3: Place them along, starting from the top, then the bottom and then distribute them evenly along the centre.

Step 4: Remove the other side of the film.

Step 5: Repeat this process up and down the cardboard's edge for all adhesive strips.

Step 6: Stick the two sides together by closing the totem.

To assemble your Akyprint totem, follow the steps below:

Step 1: Remove the rivet head from the rivet shaft. Step 2: Line up the holes with the two sides of the totem. Step 3: Insert one rivet shaft at a time into the appropriate holes. Step 4: Screw the shaft's head with a screwdriver. Step 5: Make sure the two sides of the totem are tightly joined.

To assemble your free-standing cardboard display, follow the steps below:

Step 1: Lay out your cardboard totem flat.

Step 2: Fold the ends together so that the tabs on the far side line up with the slots on the other.

Step 3: Press the tabs on the totem panels together to secure them in place.

Step 4: Make sure the two sides of the totem are tightly joined.

For our triple-sided advertising totems, you can choose between 3 different materials:

• White cardboard: 1.4 mm E-flute cardboard. Thin and ideal for indoor use.

• Corrugated plastic: 3.5 mm PVC. Lightweight, with a honeycomb structure ideal for fade resistance.

• Akyprint: 3.5 mm polypropylene plastic. Lightweight yet sturdy, with a scratch and weather-resistant surface. Great for long-term use.

Our corrugated plastic and akyprint totems are both 50 x 45 x 200 cm tall, whereas our white cardboard totems are 33 x 30 x 161 cm. The corrugated plastic and the white cardboard weigh 1.68 kg, while the akyprint totem weighs 2.25 kg.

Yes, but it depends on the material you choose:

• White cardboard: no accessories, comes with interlocking pieces

• Corrugated plastic: Each self-standing totem is supplied with 5 strips of double-sided tape.

• Akyprint: Each self-standing totem is supplied with 5 white screw rivets.

Yes, depending on which material you select, you can set up your totem outside. While our cardboard option isn’t ideal for outdoors, our corrugated plastic and akyprint options can both be used outdoors. The latter is even weatherproof.

The triple-sided totems will be sent with the 3 panels connected, with the totem folded vertically into thirds. If you order more than one, the totems will be folded into each other for easy unpacking.